Blade Replacement Guidelines

Published at:2024-07-01

Replacement Frequency

Blades and screws should be replaced every 3 to 6 weeks for optimal safety and cutting efficiency. Replace all five blades and their screws simultaneously to maintain overall mowing performance and safety.

Replacement Procedure

  • Turn off the product by pressing and holding the power button until the logo light goes off.

  • Lay the machine on its side on a soft, clean surface to prevent scratching.

  • Use a cross-point screwdriver to loosen the five screws.

  • Remove both the screws and blades.

  • After securing the new blades with the screws, ensure they move freely in the blade loop.

Precautions

  • Wear thick gloves when handling blades for inspection or maintenance.

  • Use only blades and screws recommended by HOOKII for replacement to avoid safety issues due to compatibility.

  • Avoid reusing old screws as they may lead to safety hazards.

  • It's advisable not to use power tools like electric screwdrivers to replace blades to prevent hand injuries from blade rotation.

Use of Other Brands

Due to the product's unique design, we cannot guarantee compatibility with blades from other brands. For safety, it's strongly advised to use only original blades recommended by the product manufacturer. Users assume responsibility for any safety incidents resulting from the use of non-compatible blades.

 

Generic feedback

Did you find this article helpful?