Neomow X Performance Specifications

Published at:2024-06-23

Capabilities

  • Maximum Climbing Angle: 24° (45%)

  • Obstacle Height: Can overcome obstacles up to 5cm high

  • Height Clearance: Can pass through areas with a height clearance greater than 45cm

  • Narrow Passage Width:

    - Minimum passage width required for the machine to navigate: 77cm

    - Minimum width for mowing: 150cm

To ensure smooth navigation through passages or mowing areas, we recommend keeping the passage width greater than 77cm and the mowing width greater than 150cm.

Mowing Specifications

  • Cutting Width: 280mm

  • Cutting Height Range: 30mm to 85mm (1.2in. to 3.3in.)

  • Grass Height Mowing Capacity:

  1. Daily Lawn Maintenance: Neomow X is ideal for daily lawn care. For optimal performance, we recommend trimming your lawn to below 10cm (4in.) before the first use.

  2. High Grass Mode: For occasional taller weeds, Neomow X offers a "High Grass" mode capable of cutting grass up to 15cm high. However, this mode is not suitable for extensive areas of dense, tall grass.

Boundary Distance

  • Distance from Lawn Boundary: Approximately 15cm

This includes a 10cm distance from the blade to the edge of the machine and an additional 5cm from the machine's outer shell to the boundary.

Blade Operation

When Neomow X moves from the charging station to the mowing area or through a passage, the blade deck is raised, keeping the blades at least 90mm off the ground so that they do not mow. If you want the blades to work in these areas, set the passage area within the mowing zone. This way, when the mower is performing its task, it will also mow the grass in the passage area.

For more performance details, please refer to the Neomow X user manual.

 

Generic feedback

Did you find this article helpful?