If you are unable to connect your Neomow mower to Wi-Fi or cannot access the Wi-Fi settings in the HOOKII App, this may be caused by one of the following issues.
Possible Causes
1. The Mower Is Connected Through Your Phone's Bluetooth Settings
If you connect the mower through your phone's Bluetooth settings instead of directly through the HOOKII App, it may occupy the Bluetooth communication channel.
Even if you subsequently add the mower successfully in the HOOKII App, this may prevent the Wi-Fi connection from working properly or prevent you from accessing the Wi-Fi details page.
2. Unsupported Wi-Fi Frequency Band
The mower supports 2.4 GHz Wi-Fi networks only.
If your Wi-Fi network operates on an unsupported frequency band, the mower will not be able to connect to it.
3. Weak Wi-Fi Signal
If the mower is too far away from your Wi-Fi router or signal source, the Wi-Fi signal may be too weak to establish a stable connection.
Troubleshooting Steps
Step 1. Disconnect the Mower from Your Phone's Bluetooth Settings
- Open your phone's Settings.
- Go to Bluetooth.
- Find the mower in the list of paired or connected devices.
- Disconnect the mower if it is currently connected.
Note: Do not connect the mower through your phone's Bluetooth settings. Bluetooth pairing and device connection should be handled through the HOOKII App.
Step 2. Check Your Wi-Fi Network
Please check the following:
- Frequency band: Make sure your Wi-Fi network is using the 2.4 GHz band.
- Signal strength: Make sure the mower is within a reasonable range of your Wi-Fi router and can receive a stable signal.
Still Unable to Connect?
If the Wi-Fi connection problem persists after trying the steps above, please contact HOOKII Support and provide a screen recording so our technical team can investigate further.
Please make sure your screen recording includes the following steps:
- Open your phone's Bluetooth settings and show that the mower is not connected through the phone's Bluetooth list.
- Open the HOOKII App.
- Tap the Wi-Fi button.
- Continue the operation until the connection attempt is completed or the issue occurs.
Important: Please record the entire process without cutting or skipping any steps. This recording is essential for our technical team to review the connection process and identify the cause of the problem.
Thank you for your cooperation!
Comments
0 comments
Please sign in to leave a comment.