Issue:
Your mower fails to dock properly at the charging station.
Possible Causes:
The charging station entrance is too narrow, preventing the mower from properly recognizing or aligning with the station.
The charging station was moved after creating the recharge path, causing the mower to lose its reference.
The radar sensor is dirty or covered with water droplets (dew), affecting the mower’s ability to detect and align with the charging station accurately.
- The caster wheel (rear wheel) may be stuck or unable to rotate freely, preventing the mower from adjusting its direction properly and causing docking failures.
- The white positioning markers on the charging station may be dirty, damaged, or missing. Alternatively, the mower's camera may be dirty, preventing it from accurately recognizing the markers and aligning with the charging station.
Solutions:
-
Ensure proper charging station placement: Follow the instructions in the user manual. Leave sufficient space around the station in all directions. See example below:
Redraw the recharge path: If the charging station has been moved, please update the recharge path—either by modifying the existing path or creating a new one—so the mower can recognize the updated location. (How to Modify Mowing Areas, No-Go Zones, Recharge Path and Passage)
If the radar sensor is dirty or has water droplets on its surface, gently rinse it with clean water. Then, use a soft, lint-free cloth to carefully dry the sensor.
After cleaning, try docking again to see if the issue is resolved.Check whether the caster wheel can rotate and swivel smoothly without getting stuck.
Clean the mower's camera lens to ensure it is free of dust, dirt, and water stains. Check whether the white positioning markers on the charging station are clean, intact, and securely attached. Clean them if dirty or replace them if missing or damaged.
Comments
0 comments
Please sign in to leave a comment.