If you notice that the mowing map in your app appears to be offset from its original position, don’t worry — this guide will help you fix it step by step.
✅ Solution Overview
To resolve this issue, please update your mower's firmware to the latest version, then follow the steps in the app to correct the map. The process involves remotely driving your mower for 1 meter within the map modification mode — no actual editing is needed.
Step-by-Step Instructions
Please follow the steps below. Screenshots will guide you through each stage:
1. Update to Firmware Version v1.5.0.1
Ensure your device is running firmware v1.5.0.1.
2. Enter Map Management
Open the app, go to Map Management, and tap on “Edit Map.”
3. Tap "Modify Map"
Click on the “Modify” option.
4. Select Any Mowing Zone to Edit
Choose any existing mowing area and tap “Confirm”.
5. Remote Drive the Mower for 1 Meter
Do not start the mowing process. Simply use the remote control to move the mower forward at least 1 meter.
6. Tap "Back" Without Making Changes
After driving the mower, tap “Back”. No real changes to the map are required.
7. Save the Map
Click “Save Map” to complete the process. Your map will now be realigned correctly.
🎉 Done!
Your map has been successfully corrected. You can now resume using your lawn mower as usual.
If you encounter any issues during this process, feel free to contact our support team.
Comments
0 comments
Please sign in to leave a comment.